Section 22272 HotSync® Operationsmeans that you cannot use your cradle again until youreconfigure the HotSync Manager to communicate with theport defined for cradle synchronization.Performing an IR HotSync operationAfter you complete the steps to prepare for performing an IRHotSync operation, it is easy to perform the actual operation.To perform an IR HotSync operation:1. Tap the Applications Launcher icon .2. Tap the HotSync icon .3. Tap “Local”.4. Tap the drop down menu below the HotSync icon andselect “IR to a PC/Handheld”.5. Position the IR port of your handheld within a couple ofinches of the infrared port of your computer.6. Tap the ”HotSync” icon to start the IR HotSync operation.Returning to cradle HotSync operations1. If needed, connect the cradle to a serial (COM) port ofyour computer.2. Click the HotSync Manager icon in the Windows systemtray.3. Choose “Setup”, and then click “Local”.4. Select the COM port where your cradle is connected.5. Click “OK”.
