English - 51Using the WISELINK FunctionThis function enables you to view and listen to photo (JPEG) and audio files (MP3) saved on aUSB Mass Storage Class (MSC) device.1 Press the POWER button on the remote control or frontpanel.2 Connect a USB device containing JPEG and/or MP3files to the WISELINK jack (USB jack) on the side of theTV.Removing a USB Device1 Press the MENU button to display the menu.2 Press the ▲ or ▼ button to select Guide, then press theENTER/OK button.3 Press the ENTER/OK button to select WISELINK.The photo or music files saved on the memory device arelisted.4 Press the blue button and press the ▲ or ▼ button toselect Safe Remove and press the ENTER/OK button. TheRemoving the device safe... message appears and thenthe USB could be removed safe message appears.5 Remove the USB device from the TV.➢ If you enter the WISELINK mode with no USB deviceconnected. “No external storage device found. Checkthe connection status.” message will appear. Inthis case, insert the USB device, exit the screen bypressing the WISELINK button on the remote controland enter the WISELINK screen again. Photo and audio files must be named in English.If not, the files can not be played. Change the filenames to English, French, or Spanish if necessary. Folder or file names can not exceed 128 characters.If exceeded, they won’t function. When the files stored inthe USB is over 440MB, if you select Delete All,the TV will be abnormal. You can delete it in the computer. The file system only supports the FAT16/32. Certain types of USB Digital camera and audiodevices may not be compatible with this TV. WISELINK supports USB Mass Storage Class (MSC) devices only. MSC is the device for mass storage class bulk-only transport. (e.g. thumb device, flash cardreader) WISELINK only supports the USB Mass Storage Class device (MSC). MSC is a Mass StorageClass Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card Readers. Before connecting your device to the TV, please back up your files to prevent them from damageor loss of data. SAMSUNG is not responsible for any data file damage or data loss. The USB hub is not supported and you cannot use a digital camera (PTP: Picture TransferProtocol) and USB storage device at the same time. To remove a USB storage device from the TV or to turn it off (if available), exit WISELINK first fora proper system operation.Continued...TV Side PanelWISELINKFull GuideNow&Next GuideDefault Guide : Full GuideGuideFolder 1 2007/1/2File 1.jpg 2007/1/2File 2.jpg 2007/1/2File 3.jpg 2007/1/2File 4.jpg 2007/1/2USB Device Zoom OptionPhoto InformationSafe RemoveRemoving the device safe...