Samsung PDP-TELEVISION Owner's Instructions Manual

Also see for PDP-TELEVISION: Owner's instructions Owner's instructions

Contents

English - 58Rotating1 After switching the mode to WISELINK, select a memorydevice that you have installed. (Refer to page 51~52)2 Press the ENTER/OK button to select Photo.JPEG files and existing folders are displayed.3 Press the ▲ or ▼ button to select a photo, then press theENTER/OK button.➢ Pressing the button over a photo icon shows thecurrently selected photo in full screen.4 Press the TOOLS button.Press the ▲ or ▼ button to select Rotate, then press theENTER/OK button.Press the ◄ or ► button to rotate the photo by therequired amount.➢ Whenever you press the ◄ button, it rotates by 270˚,180˚, 90˚, and 0˚.➢ Whenever you press the ► button, it rotates by 90˚,180˚, 270˚, and 0˚.➢ Rotating directly from 90 degrees to 270 degrees isnot allowed.5 To exit WISELINK mode, press the EXIT button on theremote control.➢ The rotated file is not saved.➢ If you have select ZOOM, the Rotate function isdeactivate➢ Press the WISELINK button on the remote control to turn onthe WISELINK mode.The Rotating function information icon (Displayed at the top left of the screen).Icon Current OSD FunctionRotating (270°) To rotate a photo by 270 degreesRotating (180°) To rotate a photo by 180 degreesRotating (90°) To rotate a photo by 90 degreesRotating (0°) To rotate a photo to its original stateContinued...Folder 1 2007/1/2File 1.jpg 2007/1/2File 2.jpg 2007/1/2File 3.jpg 2007/1/2File 4.jpg 2007/1/2USB  Device  Zoom  OptionPhotoStart Slide ShowZoomRotateBackground Music : OnBackground Music SettingDeletePicture Mode : DynamicSound Mode : StandardInformationMove EnterTOOLS90°Rotate