26 Using Successive RecordingSteps from 1-2 are the same as thosefor MOVIE CLIP mode.3. Press the shutter button and movieclips are recorded for as long as theavailable recording time. Movie clipswill still be recorded if the shutterbutton is released.4. Press the OK button to pause recording.5. Press the OK button again to resume the recording.6. If you wish to stop recording, press the shutter button again.This camera allows you to temporarily stop during unwantedscenes, while recording a movie clip. Using this function, you canrecord your favorite scenes into a movie clip without having tocreate multiple movie clips.Pausing while recording a movie clip (Successive Recording)Starting the recording modeStop Pause The available memory capacity may vary depending on shootingconditions and camera settings. When the Flash Off, Slow synchro mode or DUAL IS mode isselected in a low lighting condition, the camera shake warningindicator ( Ã ) may appear on the LCD monitor. In this case, usea tripod, support the camera on a solid surface or change to flashshot mode. Shooting against the light : Please do not take pictures against thesun. Doing so may make the picture dark.To take a picture against the light, pleaseuse the [Backlight] in scene shooting mode(see page 23), fill-in flash (see page 34),spot metering (see page 45), exposurecompensation (see page 40) or ACB (seepage 45) function. Avoid obstructing the lens or the flash when you capture an image. Compose the image by using the LCD monitor. Pressing the shutter button down half way.Lightly press the shutter button to confirm focus and flash batterycharge. Press the shutter button all way down to take the picture.[Lightly press the shutter button] [Press the shutter button]Things to Watch Out for When Taking Pictures