English - 14Connecting a Digital Audio SystemThe rear panel jacks on your TV make it easy to connect a Digital Audio System(Home theater/Receiver) to yourTV.1 Connect an Optical Cablebetween the DIGITAL AUDIOOUT (OPTICAL) jacks onthe TV and the Digital AudioInput (OPTICAL) jacks on theDigital Audio System.When a Digital Audio Systemis connected to the DIGITALAUDIO OUT (OPTICAL)terminal:Decrease the volume of theTV, and adjust the volumelevel with the system’svolume control.What is OPTICAL?• Converts the electric signal into an optical light signal, and transmits it through glassfibers. S/PDIF is a transmission system of digital audio in the form of a light wavethat uses a glass conductor.➢ 5.1CH audio is possible when the TV is connected to an external devicesupporting 5.1CH.➢ Each external input source device has a different back panel configuration.➢ When the receiver (home theater) is set to On, you can hear sound output fromthe TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will sendout 5.1 channel sound to the Home theater receiver. When the source is a digitalcomponent such as a DVD and is connected to the TV via HDMI, only 2 channelsound will be heard from the Home Theater receiver.Digital Audio SystemTV Rear PanelOptical Cable (Not supplied)Connecting an Amplifier / DVD Home Theater1 Connect Audio Cablesbetween the AUDIO OUT[R-AUDIO-L] on the TV andAUDIO IN [L-AUDIO-R] onthe Amplifier / DVD HomeTheater.When an audio amplifier isconnected to the AUDIO OUT[R-AUDIO-L] jacks terminals:Decrease the volume of theTV, and adjust the volumelevel with the Amplifier’svolume control.➢ Each Amplifier / DVD Home Theater has a different back panel configuration.➢ When connecting an Amplifier / DVD Home Theater, match the color of theconnection terminal to the cable.Amplifier / DVD Home TheaterTV Rear PanelAudio Cable (Not supplied)
