English - Remote ControlYou can use the remote control up to a distance of about feet from the TV.The product color and shape may vary depending on the model.The performance of the remote control may be affected by bright light.NN1 POWERTurns the TV on and off.2 NUMERIC BUTTONSPress to change the channel.3Press to select additional channels (digitaland analog) being broadcast by the samestation. For example, to select channel“54-3”, press “54”, then press “ ” and “3”.4 MUTEPress to temporarily cut off the sound.5 VOLPress to increase or decrease the volume.6 SOURCEPress to display and select the availablevideo sources.7 CH LISTUsed to display Channel Lists on the screen.8 TOOLSUse to quickly select frequently usedfunctions.9 UP▲/DOWN▼/LEFT◄/RIGHT►/ENTERUse to select on-screen menu items andchange menu values.0 INFOPress to display information on the TVscreen.! COLOR BUTTONSUse these buttons in the Channel list.@ S.MODEPress to select the sound mode.# P.MODEPress to select the picture mode.$ Use these buttons in the DMA, Anynet+modes. ( : This remote can be used tocontrol recording on Samsung recorderswith the Anynet+ feature)% TVSelects the TV mode directly.^ PRE-CHTunes to the previous channel.& CHPress to change channels.* MENUDisplays the on-screen menu.( FAV.CHPress to switch to your favorite channels.) RETURNReturns to the previous menu.a EXITPress to exit the menu.b P.SIZEPicture size selection.c SRSSelects SRS TruSurround HD mode.d CCControls the caption decoder.e MTSPress to choose stereo, mono or SeparateAudio Program (SAP broadcast).Installing Batteries in the Remote Control1. Lift the cover at the back of the remote control upward as shown in the figure.. Install two AAA size batteries.Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.. Close the cover as shown in the figure.Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for along time. (Assuming typical TV usage, the batteries should last for about one year.)If the remote control doesn’t work, check the following1. Is the TV power on?2. Are the plus and minus ends of the batteries reversed?3. Are the batteries drained?4. Is there a power outage or is the power cord unplugged?5. Is there a special fluorescent light or neon sign nearby?❑NNN