Connectinga DVDPlayeror CableBox/ Satellitereceiver(Set-TopBox)viaComponentcablesThe rear panel jacks on your TV make it easy to connect a DVD Player/Cable Box/Satellite receiver (Set-Top Box)to your TV.1 Connect Component Cablebetween the COMPONENTIN (1 or 2) [Y, PB, PR]jacks on the TV and theCOMPONENT [Y, PB, PR]jacks on the DVD Playeror Cable Box / Satellitereceiver(Set-Top Box).2 ConnectAudio Cablesbetween the COMPONENTIN (1 or 2) [R-AUDIO-L] jackson the TV and the AUDIOOUT jacks on the DVD Playeror Cable Box / Satellitereceiver (Set-Top Box).DVD Player or Cable Box /Satellite receiver (Set-Top Box)TV Rear Panel;,_ Component video separates the video into Y (Luminance (brightness)), PB(Blue) and PR (Red) for enhanced video quality. Be sure to match the componentvideo and audio connections. For example, if connecting the video cable toCOMPONENT IN 1, connect the audio cable to COMPONENT IN 1 also._-- Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a differentback panel configuration.;,_ When connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box),match the color of the connection terminal to the cable.Connecting a CamcorderThe side panel jacks on your TV make it easy to connect a camcorder to your TV,They allow you to view the camcorder tapes without using a VCR.Connect a Video Cable(or S-Video Cable) betweenthe AV IN 2 [VIDEO](or S-VIDEO)jack on the TVand the VIDEO OUT jack onthe Camcorder.Connect Audio Cablesbetween the AV IN 2[L-AUDIO-R] jacks on the TVand the AUDIO OUT jacks onthe Camcorder.TV Side Panel_ _ S-Video Cable(Not supplied)Camcorder "_ or _ Video Cable (Not supplied).d: ,oit_-- Each Camcorder has a different back panet configuration.;,_ When connecting a Camcorder, match the color of the connection terminal to the cable.