O_otion 2: Setting_the Clock AutomaticallyThe Clock can be set automatically if you are receiving a digital signal.1 Press the MENU button to display the menu.Press the A or T button to setect Setup, then press the ENTER button.Press the A or _' button to setect Time, then press the ENTER button.2 Press the ENTER button to select Clock.3 Press the ENTER button to select Clock Mode.Press the A or _' button to select Auto, then press the ENTER button.4 Press the A or _' button to select Time Zone, then press the ENTER button.5 Press the & or _' button to highlight the time zone for your local area, thenpress the ENTER button.Press the A or T button to select DST (Daylight Saving Time), then press theENTER button.Press the A or _' button to select On or Off, then press the ENTER button.Press the EXIT button to exit._-- Depending on the broadcast station and signal, the auto time may not be setcorrectly. If this occurs, set the time manually._,_ Antenna or Cable must be connected in order to set the time automatically.Continued...
