Samsung PN50B450B1DXZA User Manual

Also see for PN42B450B1D: Manual Safety instructions Quick setup guide User manual User manual

C3 Using an HDMI C=ble1. Connect an HDMI Cable between the HDMI IN (1, 2(DVl), or 3) jack on the TV and the HDMI jack on the camcorder.TV Rear Panel TV Side PanelCarncorderHDMI Cable (Not supplied)[D Each Camcorder has a different back panel configuration.Connecting a VCRVideo ConnectionThese instructions assume that you have already connected your TV to an antenna or a cable TV system (according to theinstructions on pages 9~10). Skip step 1 if you have not yet connected to an antenna or a cable system.1. Unplug the cable or antenna from the back of the TV.2. Connect the cable or antenna to the ANT IN terminal on the back of the VCR.3. Connect an Antenna Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV.4. Connect a Video Cable between the AV IN 1 [YNIDEO] or AV IN 2 [VIDEO)jack on the TV and the VIDEO OUT jack on theVCR.6. Connect Audio Cables between the AV IN 1 (or AV IN 2) [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the VCRVCR Rear PanelTV Rear Panel%[D If you have a "mono" (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks of theTV. Alternatively, connect the cable to the "R" jack.If your VCR is stereo, you must connect two cables.[D Each VCR has a different back panel configuration.[D When connecting a VCR, match the color of the connection terminal to the cable.[D When connecting to AV IN 1, the color of the AV IN 1 [YNIDEO] jack (Green) does not match the color of the video cable (Yellow).