Samsung PN50B450B1DXZA User Manual

Also see for PN42B450B1D: Manual Safety instructions Quick setup guide User manual User manual

Plug & Play FeatureWhen the TV is initially powered on, basic settings proceed automatically and subsequently,The Screen Saver is activated if there is no remote control key input for longer than 1 minute while Plug & Play is running.The Screen Saver is activated if there is no operating signal for longer than 15 minutes.1. Press the POWER button on the remote control.The message Menu Language, Store Dome, Channels, and Time will be set. isdisplayed.2. Press the ENTER_ button, then Sets the menu language, menu is automaticallydisplayed. Press the ENTER[_ button.Press the A or v button to select language, then press the ENTERI_ button.The message Select 'Home Use' when installing this TV in your home. is displayed.3. Press the _ or _. button to select Store Dome or Home Use, then press the ENTERI_button.We recommend setting the TV to Home Use mode for the best picture in your homeenvironment.4.6.G.7.8.9.@ Store Dome mode is only intended for use in retail environments.If the unit is accidentally set to Store Demo mode and you want to return to HomeUse (Standard): Press the Volume button on the TV. When the volume OSD isdisplayed, press and hold the MENU button on the TV for 5 seconds.The message Select the Antenna source to memorize, is displayed.Press the A or T button to memorize the channels of the selected connection.Press the ENTER_ button to select Start.• Air: Air antenna signal.• Cable: Cable antenna signal.• Auto: Air and Cable antenna signals.@ In Cable mode, you can select the correct signal source among STD, HRC, andmRCby pressing the A, _, _ or _ button, then press the ENTERI:_ button. If youhave Digital cable, select the cable system signal source for both Analog and Digital.Contact your local cable company to identify the type of cable system that exists inyour particular area.The TV will begin memorizing all of the available channels.@ To stop the search before it has finished, press the ENTER_ button with Stopselected.@ After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then reappears.Press the ENTERI:_ button when channel memorization is complete.The message Set the Clock Mode. is displayed. Press the ENTER_ button.Press the A or T button to select Auto, then Press the ENTERI:_ button. The message Set to daylight saving time. is displayed.If you select Manual, Set current date and time is displayed. For detailed descriptions about the Manual, refer to page 32.Press the A or T button to select Off, On, or Auto, then press the ENTERI:3_ button.The image to select time zone in which you live is automatically displayed.Press the A or T button to select the time zone, then press the ENTER_ button.If you have received a digital signal, the time will be set automatically. If not, see page 32 to set the clock.The brief instruction on How to get the best performance from your new HDTV is displayed.Press the ENTER _ button.@ This menu is available HD connection Guide in the Support menu.10. Press the ENTER_ button. The message Enjoy your TV. is displayed. When you have finished, press the ENTERI:3_button.If you want to reset this feature,.,1. Press the MENU button to display the menu. Press the A or T button to select Setup,then press the ENTERI:3_button.2. Press the ENTER_ button again to select Plug & Play. For further details on settingup options, press the ENTER_ button again.@ The Plug & Play feature is only available in the TV mode.