Samsung PN50B550 User Manual

Also see for PN50B540S3F: Manual Safety instructions User manual Quick setup guide Quick setup guide

Contents

Source List / Edit NameSource ListUse to select TV or other external input sources such as DVD / Blu-Ray players / Cableboxes / Satellite receivers (Set-Top Box) connected to the TV. Use to select the inputsource of your choice.TV, AV1, AV, Component1, Component, PC, HDMI1, HDMI/DVI, HDMI.You can choose only those external devices that are connected to the TV. In theSource List, connected inputs will be highlighted and sorted to the top. Inputs thatare not connected will be sorted to the bottom.Using the Color buttons on the remote with the Source listRed (Refresh): Refreshes the connected external devices.Press this if your Source is on and connected, but does not appear in the list.T TOOLS (Tools): Displays the Edit Name and Information menus.Press the SOURCE button on the remote control to view an external signal source.Edit NameYou can name the device connected to the input jacks to make your input source selectioneasier.VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game /Camcorder / PC / DVI PC / DVI / TV / IPTV / Blu-ray / HD DVD / DMAWhen a PC with a resolution of 1920 x 1080@60Hz is connected to the HDMI IN2(DVI) port, you should set the HDMI2/DVI mode to PC in the Edit Name menu.SupportSelf DiagnosisPicture TestIf you think you have a picture problem, perform the picture test. Check the color patternon the screen to see if the problem still exists.Does the problem still exist with this test photo? appears on the screen.If the test pattern does not appear or there is noise in the test pattern, select Yes.If the test pattern is properly displayed, select No.Yes: There may be a problem with the TV. Contact the Samsung Call center.No: There may be a problem with your external equipment. Please check yourconnections. If the problem still persists, refer to the external device’s user manual.Sound TestIf you think you have a sound problem, please perform the sound test. You can check thesound by playing a built-in melody sound through the TV.Does the problem still exist with this sound test? appears on the screen.If during the sound test you can hear sound only from one speaker or not at all, selectYes.If you can hear sound from the speakers, select No.Yes: There may be a problem with the TV. Contact the Samsung Call center.No: There may be a problem with your external equipment. Please check your connections. If the problem still persists, refer tothe external device’s user manual.If you hear no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV speakerin the Sound menu.The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressingthe MMUTE button.❑NN••O❑N❑N••N••NNContinued...English - 4Edit NameAV1AV2Component1Component2PCHDMI1HDMI2/DVI▼Enter ReturnMove----VCRDVDCable STBSatellite STBPVR STBSource ListEdit NameInputSelf DiagnosisPicture Test ►Sound TestSignal StrengthReturnEnterMoveSelf Diagnosis ►Software UpgradeHD Connection GuideContact SamsungSupport