Samsung PN50B550 User Manual

Also see for PN50B540S3F: Manual Safety instructions User manual Quick setup guide Quick setup guide

Contents

Setting Up Anynet+The following settings help set the Anynet+ functions.Press the TOOLS button to display Tools menu.You can also set the Anynet+ by selecting Tools → Anynet+ (HDMI-CEC)TTo use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On1. Press the MENU button. Press the ▲ or ▼ button to select Application, then pressthe ENTERE button.. Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), then press the ENTEREbutton.. Press the ▲ or ▼ to select Setup, then press the ENTERE button.4. Press the ENTERE button to select Anynet+ (HDMI-CEC).5. Press the ▲ or ▼ button to select On, then press the ENTERE button.The Anynet+ (HDMI-CEC) function is enabled.If you select Off, Anynet+ (HDMI-CEC) is disabled.When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ relatedoperations are deactivated.Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off1. Press the ▲ or ▼ button to select Auto Turn Off, then press the ENTERE button.. Press the ▲ or ▼ button to select Yes, then press the ENTERE button.The Auto Turn Off function is enabled.If you select No, the Auto Turn Off function is canceled.. Press the EXIT button to exit.The active source on the TV remote must be set to TV to use the Anynet+ function.If you set Auto Turn Off to Yes, connected external devices are also turned off when the TV is turned off. If an external device isstill recording, it may or may not turn off.Scanning and Switching between Anynet+ Devices1. Press the TOOLS button.Press the ▲ or ▼ button to select Device List, then press the ENTERE button.Anynet+ devices connected to the TV are listed.If you cannot find a device you want, press the red button to scan for devices.. Press the ▲ or ▼ button to select to a particular device and press the ENTEREbutton. It is switched to the selected device.to the selected device.Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, theDevice List menu appears.Switching to the selected devices may take up to 2 minutes. You cannot cancel theoperation during the switching operation.The time required to scan for devices is determined by the number of connected devices.When the device scan is complete, the number of devices found are not displayed.Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when the TV isalready on are not displayed in the device list. In this case, select the Searching Connections menu to search devices.If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure toswitch to an Anynet+ device by using the TOOLS button.TV Remote Control Buttons Available in Anynet+ ModeDevice Type Operating Status Available ButtonsAnynet+ DeviceAfter switching to the device, when themenu of the corresponding device isdisplayed on the screen.Numeric buttons ▲/▼/◄/► ENTERE buttonsColor buttons / EXIT buttonAfter switching to the device, whileplaying a file(Backward search) / (Forward search)(Stop) / (Play) / (Pause)Device with built-in Tuner After switching to the device, when youare watching a TV program CH / CH buttonAudio Device When Receiver is activated VOL / VOL / MMUTE button❑NNNNNNN❑NNNNNNNNContinued...English - 4SetupAnynet+ (HDMI - CEC) : On ►Auto Turn Off : YesReturnEnterMoveDevice ListSetupReturnEnterMoveAnynet+ (HDMI-CEC) ►Media Play (USB)ApplicationReturnEnterMoveView TVDevice ListRecording : DVDRDVDR MENUDVDR INFOReceiver : OnSetup