English03 Basic Features✎ NOTE After selecting Zoom1, Zoom2 or Wide Fit:1. Press the button to select Position.2. Press the ENTER button.3. Press the or button to move the picture upor down.4. Press the ENTER button.5. Press the button to select Reset.6. Press the ENTER button to reset the pictureto its default position. After selecting Screen Fit in HDMI (1080i/1080p) orComponent (1080i/1080p) mode, you may need tocenter the picture:1. Press the or button to select Position.2. Press the ENTER button.3. Press the , , or button to move thepicture.4. Press the ENTER button.5. Press the or button to select Reset.6. Press the ENTER button. HD (High Definition): 16:9 - 1080i/1080p (1920x1080),720p (1280x720) Settings can be adjusted and stored for eachexternal device you have connected to an input onthe TV.Input Source Picture SizeATV, AV,Component (480i, 480p)16:9, Zoom1,Zoom2, 4:3DTV(1080i),Component (1080i, 1080p),HDMI (720p, 1080i, 1080p)16:9, 4:3, Wide Fit,Screen FitPC 16:9, 4:3■ Digital Noise Filter (Off / Low / Medium / High / Auto/ Auto Visualization): If the broadcast signal received byyour TV is weak, you can activate theDigital Noise Filter feature to reduce any static andghosting that may appear on the screen.✎ When the signal is weak, try other options until thebest picture is displayed.Auto Visualization: When changing analog channels,displays signal strength.✎ Only available for analog channels.✎ When bar is green, is that the best possible signal.■ MPEG Noise Filter (Off / Low / Medium / High /Auto): Reduces MPEG noise to provide improvedpicture quality.■ HDMI Black Level (Normal / Low): Selects the blacklevel on the screen to adjust the screen depth.✎ Available only in HDMI mode.■ Film Mode (Off / Auto1 / Auto2): Sets the TV toautomatically sense and process film signals from allsources and adjusts the picture for optimum quality.✎ Available in TV, AV, COMPONENT (480i / 1080i)and HDMI (480i / 1080i).■ Screen Burn Protection: To reduce the possibility ofscreen burn, this unit is equipped with screen burnprevention technology. The Time setting allows you toprogram the time between movement of the picture inminutes.Pixel Shift (Off / On): Using this function, you canminutely move pixels on the PDP in horizontal or verticaldirection to minimize after images on the screen.✎ Optimum condition for pixel shiftItem TV/AV/Component/HDMI/PCHorizontal 0~4 4Vertical 0~4 4Time (minute) 1~4 min 4 min✎ The Pixel Shift value may differ depending on theTV size (inches) and mode.✎ This function is not available in the Screen Fitmode.Auto Protection Time (10 min. / 20 min. / 40 min. /1 hour / Off): Set the time the screen remains idle with astill image until the screen saver is activated. The ScreenSaver prevents the formation of ghost images on thescreen.Scrolling: This function removes after-images on thescreen by moving all the pixels on the PDP accordingto a pattern. Use this function when there are remainingafter-images or symbols on the screen, especially whenyou displayed a still image on the screen for a long time.✎ The after-image removal function has to beexecuted for a long time (approximately 1 hour)to effectively remove after-images on the screen.If the after-image is not removed after performingthe function, repeat the function again.✎ Press any key on the remote control to cancel thisfeature.Side Gray (Dark / Light): When you watch TV with thescreen ratio set to 4:3, the screen is prevented from anydamage by adjusting the white balance on both extremeleft and right sides.wj[`WTjiu]_TWZXX[iTWWsWYUGGGX^ YWXWTW^TWYGGG㝘䟸GXaWZaY[