English04 Advanced FeaturesRecordingYou can make a recording of a TV Program using a Samsung recorder.1. Select Recording.✎ When there are more than two recording devices When multiple recording devices are connected, the recording devices are listed. Select one recording device inthe Device List.✎ When the recording device is not displayed, select Device List and press the Red button to search devices.2. Press the EXIT button to exit.✎ You can record the source streams by selecting Recording: (device_name).✎ Pressing the (REC) button will record whatever you are currently watching. If you are watching video fromanother device, the video from the device is recorded.✎ Before recording, check whether the antenna jack is properly connected to the recording device. To properlyconnect an antenna to a recording device, refer to the recording device’s users manual.Listening through a ReceiverYou can listen to sound through a receiver (i.e Home Theater) instead of the TV Speaker.1. Select Receiver and set to On.2. Press the EXIT button to exit.✎ If your receiver supports audio only, it may not appear in the device list.✎ The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIOOUT (OPTICAL) jack of the TV.✎ When the receiver (i.e Home Theater) is set to On, you can hear sound output from the TV’s Optical jack. Whenthe TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When the source is adigital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard fromthe receiver.✎ NOTE You can only control Anynet+ devices using the TV remote control, not the buttons on the TV. The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device. The Anynet+ functions do not operate with other manufacturers’ products.wj[`WTjiu]_TWZXX[iTWWsWYUGGGZ\ YWXWTW^TWYGGG㝘䟸GXaWZaZ^