Samsung PN51E6500EF User Manual

Also see for PN51E6500: Brochure & specs

Contents

English - 22Configuring the Basic Settings in Initial SetupWhen you turn the TV on for the first time, a sequence of screens and on-screen prompts will assist you inconfiguring the TV’s basic settings. Plug the power cord into a wall outlet, and then press the P button toturn on the TV.✎ Setup is available only when the input source is set to TV. See "Changing the Input Source" (page 26).✎ To return to the previous step in the Setup sequence, select Previous.✎ If you are not using a cable box or satellite box, make sure you have connected the TV to an antennaor cable connection before you turn on the TV. See page 9 for instructions.✎ If you want to configure a wired network connection during Setup, make sure you've connecteda LAN cable to your TV. See pages 15 for instructions. If you want to configure a wireless networkconnection during Setup, make sure your wireless modem or router is on and working.1 Menu Language:Select a Language.After you press the P button, the Start screen appears. Select Nextto continue. The Menu Language screen appears. Select the menulanguage you want using your remote, and then select Next. The TV willdisplay on-screen menus using the language you select beginning withthe next step in the Setup process.2 Use Mode: Selectthe Home UseMode.On the Use Mode screen, select the Home Use using your remote, andthen select Next. The Network Settings screen appears.✎ Store Demo is for retail environments only. If you select StoreDemo, some functions will not work, and the TV will reset allfunctions to their factory default every 15 minutes. For moreinformation about Store Demo, go to the end of this section.3 Network Settings:Configure thenetwork settings✎ To configurelater, select Skip.You can set upthe networkconnection laterusing the on-screen Networkmenu.To configuring your network settings, select Start using your remote, andthen go to 3A - Wireless Network or 3B - Wired Network on the nextpage.If you do not know your network configuration information or want toconfigure the settings later, or do not have a network, select Skip, andthen go to 6 - Auto Program (1) on page 24.To configure network settings later, refer to “Setting up the Wired orWireless Network” in the e-Manual or see the Network Connectionsections in this manual (pages 14 and 30).[PE6500-ZA]BN68-04195A-X0Eng.indb 22 2012-02-11 �� 3:01:45