Samsung PN58C7000 User Manual

Also see for PN50C7000: Available Apps User manual User manual User manual User manual

Network Setup (PBC (WPS))How to set up using PBC 0NPS)If your router has a PBC (WPS) button, follow these steps:1. Connect your TV to your LAN as described in theprevious section.2. Turn on your T_, press the MENU button on yourremote, use the A or T button to select Setup, andthen press the ENTERI_ button.3. Use the A or T button to select Network in the Setupmenu, and then press the ENTERE_ button.4. On the Network screen, select Network Type.5. Set Network Type to Wireless,6. Select Network Setup. The Network Setup screenappears.How to set up automaticallyTo set up the wireless connection automatically, follow thesesteps:1. Follow Steps 1 through 6 in the "How to set up usingPBC (WPS)" procedure.2. Press the T button to select Internet Protocol Setup,and then press the ENTERE_ button. Press the A orT button to select Auto, and then press the ENTERI_button.3. Press the A button to go to Select a Network, andthen press the ENTERC_ button. The Network functionsearches for available wireless networks. When done, itdisplays a list of the available networks.4. In the list of networks, press the A or _' button to selecta network, and then press the ENTERI_ button.If the AP is set to Hidden (Invisible), you haveto select Add Network and enter the correctNetwork Name (SSID) and Security Key toestablish the connection.5. If the Security/PIN pop-up appears, go to Step 6. If theNetwork Connecting Screen appears, go to Step 10.6. Press the A or T button to select Security or PIN. Formost home networks, you would select Security (forSecurity Key), The Security Screen appears.iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii7. Press the Red button on your remote.8. Press the PBC (WPS) button on your router within 2minutes. Your TV player automatically acquires all thenetwork setting values it needs and connects to yournetwork.9. After the network connection is set up, press theRETURN button to exit the Network Setup screen.Network Setup (Auto)Most wireless networks have an optional security systemthat requires devices that access the network to transmitan encrypted security code called an Access or SecurityKey. The Security Key is based on a Pass Phrase, typicallya word or a series of letters and numbers of a specifiedlength you were asked to enter when you set up security foryour wireless network. If you use this method of setting upthe network connection, and have a Security Key for yourwireless network, you will have to enter the Pass Phraseduring the setup process.7, On the Security screen, enter your network's PassPhrase.You should be able to find the Pass Phrase onone of the set up screens you used to set up yourrouter or modem.Eng,,sh33