Samsung PN58C7000 User Manual

Also see for PN50C7000: Available Apps User manual User manual User manual User manual

Advanced FeaturesAnynet+ MenuThe Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.View TV Changes Anynet+ mode to TV broadcast mode,Device List Shows the Anynet+ device list,(devicename) MENU Shows the connected device menus, E.g, If a DVD recorder is connected, the disc menu ofthe DVD recorder will appear.(devicename) INFO Shows the play menu of the connected device. E.g, If a DVD recorder is connected, theplay menu of the DVD recorder will appear,Recording: (*recorder) Starts recording immediately using the recorder. (This is only available for devices thatsupport the recording function.)Stop Recording: (*recorder) Stops recording.Receiver Sound is played through the receiver,If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device isconnected, it will be represented as (*devicename).Setting Up Anynet+(_ MENU ITTI_ Application --_Anynet+ (HDMm-CEC)_ ENTERI_Ill SetupAnynet+ (HDMm-CEC) (Off/On): To use the Anynet+ Function, Anynet+ (HDMm-CEC) must be set to On.When the Anynet+ (HDMm-CEC) function is disabled, all the Anynet+ related operations are deactivated.Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.The active source on the TV must be set to TV to use the Anynet+ function.Even if an external device is still recording, it may turn off.I1.Switching between Anynet+ DevicesAnynet+ devices connected to the TV are listed,If you cannot find a device you want, press the Red button to refresh the list.Select a device and press the ENTERI_ button. You can switch to the selected device.The Device List menu will only appear when you set Anynet+ (HDMI-CEC) to On in the Application menu." Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switchingoperation." If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function.Make sure to switch to an Anynet+ device by using the Device List.4 English