English - 18If you want to reset this feature...1 Press the MENU button to display the menu.Press the ▲ or ▼ button to select Setup, then press the ENTER button. Press the ENTER button to select Plug & Play. For further details on settingup options, refer to the pages 16~17.➢ The Plug & Play feature is only available in the TV mode.Changing ChannelsUsing the Channel Buttons1 Press the CHRETURNTOOLSINFOW.LINKCH LISTEXITor CHRETURNTOOLSINFOW.LINKCH LISTEXIT button to change channels.➢ When you press the CHRETURNTOOLSINFOW.LINKCH LISTEXITor CHRETURNTOOLSINFOW.LINKCH LISTEXIT button, the TV changes channels insequence. You will see all the channels that the TV has memorized.(The TV must have memorized at least three channels). You will notsee channels that were either erased or not memorized. See page 20 tomemorize channels.➢ To increase the channel number, turn the wheel clockwise when the ChannelDisplay is displayed. To decrease the channel number, turn the wheelcounterclockwise.Using the Number Buttons1 Press the number buttons to go directly to a channel. For example, to selectchannel 7, press , then 7.The TV will change channels when you press the second number.➢ For quick channel change, press the number buttons, then press the ENTERbutton.➢ You can press number buttons on Remote control for direct channel access,press the same Number button again to switch between digital and analogTV channels broadcast by the same station.Using the “-” ButtonThe “RETURNTOOLSINFOW.LINKCH LISTEXIT” button is used to select stations that broadcast a digital signal.1 For example, for Channel 7-1, press 7, thenRETURNTOOLSINFOW.LINKCH LISTEXIT, then 1.➢ HD indicates the TV is receiving a Digital High Definition signal.SD indicates the TV is receiving a Standard Definition signal.➢ For quick channel change, press the number buttons, then press the ENTERbutton.Using the PRE-CH Button to select the Previous ChannelUse the number buttons to quickly tune to any channel.1 Press the PRE-CH button. The TV will switch to the last channel viewed.➢ To quickly switch between two channels that are far apart, tune to onechannel, then use the number button to select the second channel.Then use the PRE-CH button to quickly alternate between them.Plug & Play ►Language : EnglishTimeNetwork SetupV-ChipCaptionExternal SettingsEntertainment : OffSetupPlug & PlayMenu Language, Store Demo, Channels, and Timewill be set.EnterOKReturnBN68-01532A-Eng.indb 18 2008-04-18 오후 8:37:22
