English - Cable Network SetupFirst, the Network selection must be set to Cable. (See page 91)Auto SetupIf you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically configured.Please check if the LAN cable is connected. (See page 89)1 Press the MENU button to display the menu.Press the ▲ or ▼ button to select Setup, then press the ENTER button.2 Press the ▲ or ▼ button to select Cable Network Setup, then press the ENTERbutton.3 Press the ENTER button to select Internet Protocol Setup.4 Press the ▲ or ▼ button to select Auto Setup, then press the ENTER button.The Internet Protocol is set automatically.Select Network Test to check the network connectivity.(Refer to page 93)Press the EXIT button to exit.Manual SetupTo connect the TV to the LAN using a static IP address, you must set up the InternetProtocol (IP).Please check if the LAN cable is connected. (See page 89)1 Press the MENU button to display the menu.Press the ▲ or ▼ button to select Setup, then press the ENTER button.2 Press the ▲ or ▼ button to select Cable Network Setup, then press the ENTERbutton.3 Press the ENTER button to select Internet Protocol Setup.4 Press the ▲ or ▼ button to select Manual Setup, then press the ENTER button.5 Press the ▲, ▼, ◄ or ► button to move to an item, and press the numeric button toconfigure the selected item. Press the ENTER button.Select Network Test to check the network connectivity.(Refer to page 93)Press the EXIT button to exit.➣➣➣➣➣➣SetupTimeNetwork selection : CableCableNetworkSetup ►Wireless Network SetupV-ChipCaptionExternal SettingsEntertainment : OffEnergy Saving : OffPIPSetupTimeNetwork selection : CableCableNetworkSetup ►Wireless Network SetupV-ChipCaptionExternal SettingsEntertainment : OffEnergy Saving : OffPIPCable Network SetupInternet Protocol Setup : Manual SetupNetwork TestIP Address : 0 0 0 0Subnet Mask : 0 0 0 0Gateway : 0 0 0 0DNS Server : 0 0 0 0Enter ReturnMove Number0 ~ Cable Network SetupInternet Protocol Setup : Auto SetupNetwork TestIP Address :Subnet Mask :Gateway :DNS Server :EnterMove ReturnAuto SetupManual Setup0 0 0 00 0 0 00 0 0 00 0 0 0Cable Network SetupInternet Protocol Setup : Auto SetupNetwork TestIP Address :Subnet Mask :Gateway :DNS Server :EnterMove Return0 0 0 00 0 0 00 0 0 00 0 0 0Auto SetupManual SetupBN68-01532A-Eng.indb 92 2008-04-18 오후 8:39:08
