Samsung PPM42M8H Owner's Instructions Manual

Also see for PPM42M8HB: Quick setup guide

Contents

English - 33Displaying the Setting InformationYou can view the setting status you select by pressing the “INFO”button on the remote control.Setting and Displaying the Current TimeYou can set the PDP Display’s clock so that the current time isdisplayed by pressing the “INFO” button. You must also set thetime if you wish to use the automatic on or off timers.1 Press the MENU ( ) button.Result: The main menu is displayed.2 Press the … or † button to select Setup.Result: The Setup menu is displayed.3 Press the ENTER ( ) button.4 Press the … or † button to select Time.Press the ENTER ( ) button.Result: The Clock Set is selected.5 Press the ENTER ( ) button again.6 Press the œ or √ button to select Hour or Minute.Set these by pressing the … or † button.➢ You can set the hour and minute directly by pressingthe numeric buttons on the remote control.7 Press the ENTER ( ) button.8 Press the EXIT button to exit.➢ In the event of a power interruption or the set being turned off atthe supply, the settings for the Clock will be lost.AVPicture : DynamicSound : CustomSRS TS XT : Off-- : --TimeLanguage : EnglishPCSetupMove Enter ReturnClock Set 12: 00On Timer 12: 00 OffOff Timer 12: 00 OffTimeMove Enter ReturnClock SetMove Adjust ReturnHour12 00Minute