Samsung PPM42M8H Owner's Instructions Manual

Also see for PPM42M8HB: Quick setup guide

Contents

English - 34Switching the PDP Display On and Off AutomaticallyYou can set the on or off timers so that the PDP Display will:◆ Switch on automatically and tune source of your choiceat the time you select.◆ Switch off automatically at the time you select.➢ The first step is to set the PDP Display’s clock (refer to“Setting and Displaying the Current Time” on page 33).1 Press the MENU ( ) button.Result: The main menu is displayed.2 Press the … or † button to select Setup.Result: The Setup menu is displayed.3 Press the ENTER ( ) button.4 Press the … or † button to select Time.Press the ENTER ( ) button.Result: The Time menu is displayed.5 Press the … or † button to select On Timer.Press the ENTER ( ) button.Result: The On Timer menu is displayed.6 Select Hour, Minute, Source (AV, S-Video, Component, PC1, PC2, orDVI), or Volume by pressing the œ or √ button.Set these by pressing the … or † button.➢ You can set the hour and minute directly by pressingthe numeric buttons on the remote control.7 Press the œ or √ button to select Activation.8 To activate On Timer with the setting entered, select Yes bypressing the … or † button.9 Press the ENTER ( ) button.Result: The Time menu is displayed again.Continued...TimeLanguage : EnglishPCSetupMove Enter ReturnClock Set 12: 00On Timer 12: 00 OffOff Timer 12: 00 OffTimeMove Enter ReturnOn TimerMove Adjust ReturnHour12 00MinuteSourceComponent10VolumeNoActivationOn TimerMove Adjust ReturnHour12 00MinuteSourceComponent10VolumeYesActivation