Connecting and Using the Home Theater SystemConnecting the Home Theater System① Connect the monitoring audio out L, andR jacks of the MONITOR OUT on therear-side connection panel of the PDPTV to the AUDIO IN jacks of the DVDHome Theater System (or AV Receiver)using the audio cable.② Press the SOURCE button to select thedesired external device connected to thePDP TV.③ If you want to hear the sound throughseparate speakers, cancel the internalamplifier.To Display the DVD Home Theater! Turn the PDP on and press the SOURCE button to select the Ext.1 (or Ext.2, Ext.3).@ Be sure to connect the video cable properly if desired external input (Ext.1, Ext.2, or Ext.3)cannot be selected.# Play the DVD after activating the DVD Home Theater System.$ Use the volume control of the Home Theater System while watching the PDP using the DVDHome Theater, where the PDP TV does not produce the audio.DVD Home TheaterRear of the TVAV Receiver Amplifier① ②Use the Monitor Out ports of the PDP for Home Theater System Connections.☛ ◆ Refer to corresponding user’s manual from the manufacturer for wiring thespeakers to the DVD Home Theater System (or AV Receiver).◆ Disable the PDP TV internal speaker to enjoy the rich sound through thespeakers of your Home Theater System.◆ In this case, enjoy the sound from the Home Theater System while the PDP TVdoes not produce the audio.English - 59
