Setting up Your PC Software (Windows only)English - 60The Windows display-settings for a typical computer are shown below. But the actual screens on yourPC will probably be different, depending upon your particular version of Windows and your particularvideo card. But even if your actual screens look different, the same, basic set-up information will applyin almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)1 Right click the mouse on the Windows Desktop,then click on Properties. The Display Dialog-Boxwill be displayed.2 Click on Settings, then set the Display Modewith reference to the Display Modes Table. Youdo not need to change the Colours settings.3 Click on Advanced. A new settings dialog boxwill be displayed.4 Click on the Monitor tab, then set the ScreenRefresh Rate with reference to the DisplayModes Table. Set the Vertical Frequency andHorizontal Frequency individually if you can doso instead of setting the Screen Refresh Rate.5 Press the OK button, close the window, thenpress the OK button on the Display RegistrationInformation window. Automatic re-booting maycommence at this moment.6 Shutdown the PC, and connect it to your TV.(See page 57)➢ ◆ The actual screens on your PC may lookdifferent, depending on your particularversion of Windows and the type of yourPC.◆ When you use your TV as a PC monitor, itsupports Colours up to 32 bits.◆ In this case, the display on the TV may lookdifferent depending on your particularversion of Windows or the PCmanufacturer.◆ When connecting a PC (including the DVIconnection), you must set it to the displaysettings that are supported by the TV.Otherwise, the message Out of inputrange will be displayed.2345
