Samsung PS-42C6H Owner's Instructions Manual

English - 31Setting Up Your Remote ControlSetting Up the Remote to Operate Your DVD1 Turn off your DVD.2 Press the DVD button on your TV’s remote control.3 Press the SET button on your TV’s remote control.4 Using the number buttons on your remote control, enter three digits of theDVD code listed on page 34 of this manual for your brand of DVD. Makesure you enter three digits of the code, even if the first digit is a “0”. (If morethan one code is listed, try the first one.)5 Press the POWER button on the remote control.Your DVD should turn on if your remote is set up correctly.If your DVD does not turn on after set-up, repeat steps 2, 3 and 4, but tryone of the other codes listed for your brand of DVD. If no other codes arelisted, try each code, 000 through 141.Note on Using Remote Control Modes: DVDWhen your remote control is in “DVD” mode, the volume buttons still control yourTV’s volume.Setting Up the Remote to Operate Your Set Top Box1 Turn off your STB.2 Press the STB button on your TV’s remote control.3 Press the SET button on your TV’s remote control.4 Using the number buttons on your remote control, enter three digits of theSTB code listed on page 33 of this manual for your brand of STB. Makesure you enter three digits of the code, even if the first digit is a “0”. (If morethan one code is listed, try the first one.)5 Press the POWER button on the remote control.Your STB should turn on if your remote is set up correctly.If your STB does not turn on after set-up, repeat steps 2, 3 and 4, but tryone of the other codes listed for your brand of STB. If no other codes arelisted, try each code, 000 through 074.Note on Using Remote Control Modes: STBWhen your remote control is in “STB” mode, the volume buttons still control yourTV’s volumecontinued...