Samsung PS-42C7HD Owner's Instructions Manual

Contents

English - 14Your television has several setting options that allow you to control the picturequality.◆ Contrast – Brightness – Sharpness – Colour – Tint (NTSC only)◆ Contrast – Brightness – Colour : PC ModePress the œ or √ button until you reach the optimal setting.◆ Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2◆ Reset: You can return to the factory defaults picture settings.➢ The reset function is set for each picture mode and colour tone.1 Press the MENU ( ) button to display the menu.2 Press the … or † button to select Picture, then press the ENTER/OK ( )button.3 Press the ENTER/OK ( ) button twice.4 Select the required mode by pressing the … or † button, then press the ENTER/OK ( ) button.Available modes: Dynamic, Standard, Movie, Custom5 Select the required option by pressing the … or † button, then press the ENTER/OK ( ) button.6 When you are satisfied with your setting, press the ENTER/OK ( ) button.7 Press the EXIT button to exit.Customizing the Picture SettingsModeMove Enter ReturnMode : DynamicContrast 100Brightness 50Sharpness 75Colour 55Tint G 50 R 50Colour Tone : Cool1ResetTVCool2Cool1NormalWarm1Warm2Selecting the Picture SizeYou can select the picture size which best corresponds to your viewingrequirements.1 Press the MENU ( ) button to display the menu.2 Press the … or † button to select Picture, then press the ENTER/OK ( )button.3 Press the … or † button to select Size, then press the ENTER/OK ( )button.4 Select the required option by pressing the … or † button, then press theENTER/OK ( ) button.Available options: Auto Wide, 16:9, Wide 4:3, Zoom, 4:3◆ Auto Wide: Expanding and pulling up the picture from 4:3 to 16:9 ratio.◆ 16:9: Sets the picture to 16:9 wide mode.◆ Wide 4:3: Magnify the size of the picture more than 4:3.Move the screen up/down using the … or † button afterselecting the by pressing the √ or ENTER/OK ( ) button.◆ Zoom: Magnify the size of the picture vertically on screen.◆ 4:3: Sets the picture to 4:3 normal mode.5 Press the EXIT button to exit.➢ You can change the picture size simply by pressing the P.SIZE button on the remote control.➢ If you change the picture size when PIP is On, PIP will automatically be turned Off.➢ Depending on the input source, the picture size options may vary.➢ The items available may differ depending on the selected mode.Positioning and Sizing the screen using Zoom◆ Resizing the screen using the Zoom enables the positioning and sizing of the screen to up/down directionusing the … or † button as well as the screen size.◆ Move the screen up/down using the … or † button after selecting the by pressing the œ or √ button.◆ Resize the screen vertically using the … or † button after selecting the by pressing the œ or √ button.SizeMove Enter ReturnAuto Wide16:9Wide 4:3Zoom4:3TV