English - 66Programming the Remote Control for Other ComponentsYour TV comes equipped with a universal remote control. Inaddition to controlling the TV, the universal remote control canalso operate a VCR, Cable box, DVD, and some Samsung Set-topboxes (even if your VCR, Cable box and DVD are made bymanufacturers other than Samsung).➢ The remote control might not be compatible with allVCRs, DVD players, Cable boxes, and Set-Top Boxs.1 Turn off your VCR (Cable box or DVD).2 Press the MODE button to switch the remote control to the VCR(CATV or DVD) mode.➢ The remote control has five modes : TV, STB, VCR,CABLE and DVD.3 Press the SET button.4 Enter 3 digits of the VCR (Cable box or DVD) code listed on thenext page for your VCR (Cable box or DVD).Example: To enter code “6”, press 0, 0, and 6.To enter code “76”, press 0, 7, and 6.5 Press the (power) button. Your VCR (Cable box or DVD)should turn on. If it turns on, your remote control is now setcorrectly.➢ If it does not turn on, repeat the steps above, but try one ofthe other codes listed for your particular brand.6 Once your remote control is set up, press the MODE button anytime you want to use the remote control to operate the VCR(Cable box or DVD).➢ ◆ When your remote control is in STB, VCR, CABLE orDVD mode, the volume buttons still control yourtelevision’s volume.◆ When your remote control is in TV mode, the VCR orDVD control buttons (rewind, stop, play/pause, and fastforward) still operate your VCR or DVD.continued...
