English - 12Plug & Play FeatureWhen the television is initially powered on, several basiccustomer settings proceed automatically and subsequently.The following settings are available.☛ If you accidentally select the wrong country for your TV, thecharacters on the screen may be wrongly displayed.1 If the television is in standby mode, press the POWER buttonon the remote control. The message Start Plug & Play isdisplayed. Press the ENTER button.2 The Language menu will automatically appear after severalseconds.3 Select the appropriate language by pressing the ▲ or ▼ button.Press the ENTER button. The message Select Home Modewhen installing this TV at home. is displayed.4 Press the ◄ or ► button to select Shop or Home, then pressthe ENTER button. The message to check the connected statusof the antenna is displayed.➢ The default selection is Home.➢ We recommend setting the TV to Home mode for the bestpicture in your home environment.➢ Shop mode is only intended for use in retail environments.➢ If the unit is accidentally set to Shop mode, and you want toreturn to Dynamic (Home) mode, press the Volume buttonand then hold down the MENU button for five seconds onthe TV panel.5 Make sure that the antenna is connected to the TV.Press the ENTER button. The Country menu is displayed.6 Select your country or area by pressing the ▲ or ▼ button.Press the ENTER button. The menu to select channels isdisplayed.7 To start channel store, press the ENTER button.The search will end automatically. The TV will begin memorizingall of the available channels.Press the ENTER button to set the clock.8 Press the ◄/►/ENTER button to select Month, Day, Year,Hour, or Minute. Set these by pressing the ▲ or ▼ button.➢ You can set the Month, Day, Year, Hour, or Minutedirectly by pressing the numeric buttons on the remotecontrol.9 Press the ENTER button to confirm your setting.The message Enjoy your viewing is displayed.When you have finished, press the ENTER button.➢ Even if the ENTER button is not pressed, the message willautomatically disappear after several seconds.➢ Plug & Play feature is available in the TV mode only.Continued...Plug & PlayStart Plug & Play.OKEnter ReturnPlug & PlayLanguageMove Enter SkipEnglishDeutschFrançaisItaliano▼Plug & PlaySelect Home Modewhen installing this TV at home.Move Enter SkipShop HomePlug & PlayCountryMove Enter SkipBelgiumFranceGermanyItaly▼Plug & PlayAuto StoreP 1 C -- 40 MHz0 %Enter SkipStartPlug & PlayCheck antenna input.Enter SkipOKOKEnjoy your viewingPlug & PlayAdjust Move Enter01 01 2007 12 00Clock SetMonth Day Year Hour Minute