◀ ▶EnglishProblem Possible SolutionI want to start Anynet+. • Check if the Anynet+ device is properly connected to the TV andcheck if the Anynet+ (HDMI-CEC) is set to On in the Anynet+Setup menu.• Press the TOOLS button to display the Anynet+ menu and select amenu you want.I want to exit Anynet+. • Select View TV in the Anynet+ menu.• Press the SOURCE button on the TV remote control and select anon- Anynet+ device.The message “Connecting toAnynet+ device...” appears onthe screen.• You cannot use the remote control when you are configuringAnynet+ or switching to a view mode.• Use the remote control when the Anynet+ setting or switching toview mode is complete.The Anynet+ device does notplay.• You cannot use the play function when Plug & Play (initial setup) isin progress.
