Samsung PS50A450 User Manual

Also see for PS42A450: User manual User manual User manual

Contents

English - 4Continued...Setting Up Anynet+The following settings are to use Anynet+ functions.Using the Anynet+ Function1 Press the MENU button to display the menu.Press the ▲ or ▼ button to select Input, then press theENTER button. Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC),then press the ENTER button. Press the ▲ or ▼ button to select Setup, then press theENTER button.4 Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC),then press the ENTER button.5 Press the ▲ or ▼ button to select On, then press theENTER button.➢ The Anynet+ (HDMI-CEC) function is enabled.➢ If you select Off, Anynet+ (HDMI-CEC) is disabled.Turning an Anynet+ Device Off Automatically when the TV isTurned Off4 Press the ▲ or ▼ button to select Auto Turn Off, then pressthe ENTER button.5 Press the ▲ or ▼ button to select Yes, then press theENTER button.➢ The Auto turn off function is enabled.➢ If you select No, the Auto turn off function is canceled.Press the EXIT button to exit.➢ The Select Device setting of the TV remote control is to be setto TV to use the Anynet+ function.➢ If you set Auto Turn Off to Yes, connected external devices are also turned off when the TV is turnedoff. However, if the device is recording, it may not be turned off.➢ When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.SetupAnynet+ (HDMI-CEC) : OffAuto Turn Off : OffSearching ConnectionsEnter ReturnMoveOffOnSetupAnynet+ (HDMI-CEC) : OnAuto Turn Off : OffSearching ConnectionsEnter ReturnMoveNoYesScanning and Switching between Anynet+ Devices1 Press the MENU button to display the menu.Press the ▲ or ▼ button to select Input, then press theENTER button. Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC),then press the ENTER button. Press the ▲ or ▼ button to select Select Device, then pressthe ENTER button.4 Press the ▲ or ▼ button to select to a particular device andpress the ENTER button. It is switched to the selected device.5 If you cannot find a device you want, press the ▲ or ▼ buttonto select Searching Connections, then press the ENTERbutton.The meassage Configuring Anynet+ connection isdisplayed. When searching devices completes, the connecteddevices are listed in the Anynet+ menu.➢ Switching to the selected devices may take up to 2 minutes.You cannot cancel the operation during the switchingoperation.➢ The time required to scan for devices is determined by thenumber of connected devices.➢ When the device scan is complete, the number of found devices is not displayed.➢ Although the TV automatically scans devices when it is turned on using the POWER button, devicesconnected when the TV is on or under a specific circumstance are not displayed in the device list.Therefore select Searching Connections menu to search devices.➢ If you have selected external input mode by pressing the SOURCE button, you cannot use theAnynet+ function. Make sure to switch to an Anynet+ device by using the TOOLS button.SetupAnynet+ (HDMI-CEC) : On Auto Turn Off : Yes Searching Connections Enter ReturnMoveEnterMoveView TVSelect Device Record Menu on Device Device Operation Receiver :Off Setup TV P 1ReturnDVDR1DVDRDVD1DVDEnterMoveView TVSelect Device Record Menu on Device Device Operation Receiver :Off Setup TV P 1Return