Samsung PS50A450 User Manual

Also see for PS42A450: User manual User manual User manual

Contents

English - 5Anynet+ MenuThe Anynet+ menu changes depending on the type and status of the Anynet+ devices connectedto the TV.Anynet+ Menu DescriptionView TV Switches from Anynet+ to TV broadcast mode.Select Device Your TV connects to the corresponding device.Record Starts a recording. (This menu works only for a device supportingrecording.)Menu on Device Shows the menu of the connected device.Example. When a DVD Recorder is connected, the DVD Recorder’stitle menu appears.Device Operation Shows the play control menu of the connected device.Example. When a DVD Recorder is connected, the play controlmenu of the DVD Recorder appears.Receiver Sound is output through the receiver.Setup You can set the environment for using Anynet+.TV Remote Control Buttons Available in Anynet+ ModeDevice Type Operating Status Available ButtonsAnynet+ DeviceAfter switching to thedevice, when the menu ofthe corresponding device isdisplayed on the screen.Numeric buttons▲/▼/◄/►/ENTER buttonsColour buttonsEXIT buttonAfter switching to the device,while playing a file W.LINK(Backward search)W.LINK(Forward search)W.LINK(Stop)W.LINK/W.LINK(Play/Pause)Device with built-in Tuner After switching to the device,when you are watching a TVprogram PW.LINK/W.LINK buttonAudio Device When Receiver is activated W.LINK/W.LINK buttonMUTE button➢ The Anynet+ function only works when the remote control is set to TV.➢ TheW.LINKbutton works only while in the recordable state.➢ You cannot control Anynet+ devices using the buttons on the side of the TV. You can control Anynet+devices only using the TV remote control.➢ The TV remote control may not work under certain conditions. In this case, re-select the Anynet+device.➢ The Anynet+ functions don’t operate for the products from other manufacturers.➢ In Anynet+ mode, the colour buttons may not work properly.➢ TheW.LINK,W.LINKoperations may differ depending on the device.RecordingYou can make a recording of a TV program using a recorder.Press theW.LINKbutton.Recording begins. (Only when the Anynet+ enabled recording device is connected.)➢ The current TV program is recorded in the Watching TV status. If you are watching video fromanother device, the video from the device is recorded.➢ You can also record the source streams by selecting Record after pressing the TOOLS button.➢ Before recording, check whether the antenna jack is properly connected to the recording device.For the antenna connection to the recording device, refer to its user manual.