English - 44.5 Common Interface− Installing the CI Card Purchase the CI CAM module by visiting your nearestdealer or by phone. Insert the CI CARD into the CAM in the direction of thearrow until it fits. Insert the CAM with the CI CARD installed into thecommon interface slot.➢ Insert the CAM in the direction of the arrow, right upto the end so that it is parallel with the slot. Check if you can see a picture on a scrambled signalchannel.➢ You can install the CAM anytime whether the TV isON or OFF.− Application InfoThis contains information on CAM inserted in the CI slot anddisplays it. Press the ENTER button to display the information for your application.− CI MenuThis helps the user select an item from the CAM-supported menu. Press the ENTER button. The options of the selected menu are displayed.Press the ▲ or ▼ button to select the required option, then press the ENTER button.➢ Select the CI Menu based on the PC Card menu.4. SystemThis menu consists of 5 sub-menus:Product Information, Signal Information, SoftwareUpgrade, and Reset.− Product InformationYou can view your product information. For service or repair,please contact a Samsung approved dealer. Press the ENTER button with Product Informationselected. The product information menu is displayed.− Software Version / Firmware Version− Signal InformationYou can get information about the signal status. Press the ENTER button with Signal Informationselected. The technical information for signal status isdisplayed.− Service / Service ID / Multiplex / Network / Biterror level / Signal StrengthContinued...System SetupMove Enter ReturnDTVProduct Information Signal Information Software Upgrade Reset SystemMove Enter ReturnDTVSoftware Version: T-PERLDEUC-1004Firmware Version: T-EMMAZDEUB-010Product InformationReturnDTVService: ?Service ID: 0000Multiplex: ? (TSID 0000,ONID 0000)Network: ? (ID 0000)Bit error level: 10Signal Strength: 0Signal InformationReturnDTVCI MenuMove Enter ExitType: CAManufacturer: Canal PlusInfo: Top Up TVApplication InfoReturnDTV