English - Using the Option Menu1 Complete Steps 1 to 3 of Using the WISELINK Menu.(Refer to page 33) Press the ◄ or ► button to move to Photo, then press theENTER button.The saved file information is displayed as a folder or file. Press the ▲, ▼, ◄ and ► button to select a file, thenpress the ENTER button. Pressing the button over a photothumbnail displays the photo in full screen.4 Press the INFO button to display the option (Start SlideShow, Zoom, Rotate, List)Zoom: Press the ▲ or ▼ button to select Zoom, then press theENTER button. Each time the ▲ or ▼ button is pressed, the photo sizeincreases.(X1 → X → X4 )- X1 : Restore a photo to its original size.- X : Zoom-in to a photo x2.- X4 : Zoom-in to a photo x4. To pan up/down/left/right in the zoomed-in photo, press theINFO button to remove option menu, then press the ▲, ▼, ◄and ► buttons.➢ The Rotate, Start Slide Show option is disabled when the Zoom option is selected.Rotate: Press the ▲ or ▼ button to select Rotate, then press theENTER button. Each time the ▲ or ▼ button is pressed, the photo rotatesrepeatedly.- 0º : This rotates a photo to its original position- 0º : This rotates a photo by 90 degrees- 10º : This rotates a photo by 180 degrees- 0º : This rotates a photo by 270 degrees➢ The rotated file is not saved.➢ The Zoom, Start Slide Show option is disabled when the Rotate option is selected.ExitStart Slide ShowZoom X1 Rotate 0º ListStart Slide ShowZoom X1 Rotate 0º ListExitStart Slide ShowZoom X1Rotate 0º ListX1X2X4ExitStart Slide ShowZoom X1 Rotate 0ºList0º90º180º270º0ºExit