Samsung PS50A650T1R User Manual

Also see for PS50A650: User manual

Contents

English - 41Continued...Setting Up Anynet+The following settings are to use Anynet+ functions.Using the Anynet+ Function1 Press the MENU button to display the menu.Press the ▲ or ▼ button to select Input, then press theENTER button. Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), thenpress the ENTER button. Press the ▲ or ▼ button to select Setup, then press theENTER button.4 Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC),then press the ENTER button.5 Press the ▲ or ▼ button to select On, then press theENTER button.➢ The Anynet+ (HDMI-CEC) function is enabled.➢ If you select Off, Anynet+ (HDMI-CEC) is disabled.Turning an Anynet+ Device Off Automatically when the TV is Turned Off4 Press the ▲ or ▼ button to select Auto Turn Off, then press the ENTER button.5 Press the ▲ or ▼ button to select Yes, then press theENTER button.➢ The Auto turn off function is enabled.➢ If you select No, the Auto turn off function is canceled.Press the EXIT button to exit.➢ The Select Device setting of the TV remote control is to be setto TV to use the Anynet+ function.➢ If you set Auto Turn Off to Yes, connected external devices arealso turned off when the TV is turned off. However, if the deviceis recording, it may not be turned off.➢ When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.SetupAnynet+ (HDMI-CEC) : OffAuto Turn Off : OffSearching ConnectionsEnter ReturnMoveOffOnSetupAnynet+ (HDMI-CEC) : OnAuto Turn Off : : OffSearching ConnectionsEnter ReturnMoveNoYesScanning and Switching between Anynet+ Devices1 Press the MENU button to display the menu. Press the ▲ or ▼button to select Input, then press the ENTER button. Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), thenpress the ENTER button. Press the ▲ or ▼ button to select Select Device, then pressthe ENTER button.4 Press the ▲ or ▼ button to select to a particular device andpress the ENTER button.It is switched to the selected device.5 If you cannot find a device you want, press the ▲ or ▼ button toselect Searching Connections, then press the ENTER button.The me assage Configuring Anynet+ connection isdisplayed. When searching devices completes, the connecteddevices are listed in the Anynet+ menu.➢ Switching to the selected devices may take up to 2 minutes.You cannot cancel the operation during the switching operation.➢ The time required to scan for devices is determined by thenumber of connected devices.➢ When the device scan is complete, the number of founddevices is not displayed.➢ Although the TV automatically scans devices when it is turned on using the POWER button, devicesconnected when the TV is on or under a specific circumstance are not displayed in the device list.Therefore select Searching Connections menu to search devices.➢ If you have selected external input mode by pressing the SOURCE button, you cannot use theAnynet+ function. Make sure to switch to an Anynet+ device by using the TOOLS button.SetupAnynet+ (HDMI-CEC) : On Auto Turn Off : Yes Searching Connections Enter ReturnMoveEnterMoveView TVSelect Device Record Menu on Device Device Operation Receiver :Off Setup TV P 1ReturnDVDR1DVDRDVD1DVDEnterMoveView TVSelect Device Record Menu on Device Device Operation Receiver :Off Setup TV P 1Return