Samsung PS50C550G1W User Manual

Also see for PS50C550: User manual User manual

701 Getting StartedEnglishConnecting to an AntennaWhen the TV is initially powered on, basic settings proceed automatically.✎ Preset: Connecting the mains and antenna.Plug & Play (Initial Setup)When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press thePOWERP button. Plug & Play is available only when the Input source is set to TV.✎ To return to the previous step, press the Red button.1 Selecting a language Press the ▲ or ▼ button, then press the ENTERE button.Select the desired OSD (On Screen Display) language.PPOWER2 Selecting Store Demoor Home UsePress the ◄ or ► button, then press the ENTERE button.y Select the Home Use mode. Store Demo Mode is for retailenvironments.y To return the unit’s settings from Store Demo to Home Use(standard): Press the volume button on the TV. When you see thevolume OSD, press and hold MENU for 5 sec.3 Selecting a country Press the ▲ or ▼ button, then press the ENTERE button.Select the appropriate country. If the desired country does not exist on the menu, selectOthers.4 Selecting an antenna Press the ▲ or ▼ button, then press the ENTERE button.Select Air or Cable.5 Selecting a channel Press the ▲ or ▼ button, then press the ENTERE button.Select the channel source to memorise. When setting the antenna source to Cable, a stepappears allowing you to assign numerical values (channel frequencies) to the channels. Formore information, refer to Channel → Auto Store (p. 13).✎ Press the ENTERE button at any time to interrupt the memorisation process.6 Setting the ClockModeSet the Clock Mode automatically or manually.Press the ▲ or ▼ button to select Auto, then press the ENTERE button.7 Viewing the HDConnection Guide.The connection method for the best HD screen quality is displayed.8 Enjoy your TV. Press the ENTERE button.If You Want to Reset This Feature...Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want tochange the PIN number, use the Change PIN function.Power InputANT OUT1 (DVI)1 (DVI)VHF/UHF AntennaorCable