English - 1Real 100Hz Demo→ Off / OnYou can get a clear distinction between Real 100Hz and 50Hz, especially when watching fast moving scenes. Therefore, whenseeing slow moving scenes, you will not be able to distinguish between Real 100Hz and 50Hz. Demo 100Hz works only with50Hz signal. Real 100Hz demo mode is provided for shop demonstration with special pictures.Movie Plus → Off / Low / Medium / High / DemoYou can view more natural skin and clear text even in fast moving scenes.Use this function when watching movies.This function is not available in Wide Zoom and Zoom modes.This function is not available when PIP is set to On.It is not supported in HDMI 1080p/24Hz, 25Hz, 30Hz mode.Blue Only Mode → Off / OnThis function is for AV device measurement experts. This function displays the blue signal only by removing the red andgreen signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of videoequipment such as DVD players, Home Theaters, etc. Using this function, you can adjust the Colour and Tint to preferredvalues appropriate to the signal level of each video device using the Red / Green / Blue / Cyan / Magenta / Yellow Colour BarPatterns, without using an additional Blue Filter.Blue Only Mode is available when the picture mode is set to Movie or Standard.Screen Burn ProtectionTo reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enablesyou to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot). The Time setting allows you to programthe time between movement of the picture in minutes.Pixel Shift: Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to minimize afterimage on the screen.Set Pixel Shift to On by pressing the ▲ or ▼ button, then press the ENTER button.Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.Available options: Horizontal Dot, Vertical Line, Time.Optimum condition for pixel shift;PC TV/Ext/AV/Component/HDMIHorizontal Dot 4 4Vertical Line 4 4Time (minute) 4 2 minThe Pixel Shift value may differ depending on the monitor size (inches) and mode.This function is not available in the Just Scan mode.All White: This function helps remove after images on the screen by changing the colour of pixels to white. Use thisfunction when there are remaining after images or symbols on the screen especially when you displayed a still image on thescreen for a long time.Scrolling: This function helps remove after images on the screen by moving all the pixels on the PDP according to apattern Use this function when there are remaining after images or symbols on the screen especially when you displayed astill image on the screen for a long time.Side Gray: When you watch TV with the screen ratio of 4:3, the screen is prevented from any damage by adjusting thewhite balance on both extreme left and right sides.Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.Light: When you set the screen ratio to 4:3, it brightens the left and right sides.Picture Reset → Reset Picture Mode / CancelResets all picture settings to the default values.Select a picture mode to be reset. The reset is performed for each picture mode.NNNNN•NNNNNN•••--❑N
