English - Installing Batteries in the Remote Control1. Lift the cover at the back of the remote control upward as shown in the figure.. Install two AAA size batteries.Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagraminside the compartment.3. Close the cover.Remove the batteries and store them in a cool, dry place if you won’t beusing the remote control for a long time.Using the remote control with the ON / OFF @ light button set to on willreduce the battery usage time.If the remote control doesn’t work, check the following:1. Is the TV power on?2. Are the plus and minus ends of the batteries reversed?3. Are the batteries drained?4. Is there a power outage or is the power cord unplugged?5. Is there a special fluorescent light or neon sign nearby?NSwitching On and OffThe mains lead is attached to the rear of your set.1. Plug the mains lead into an appropriate socket.The standby indicator lights up on your set.. Press the POWERP button on your set.You also can press the POWERP button or the TV button on the remote control to turn the TV on.The programme that you were watching last is reselected automatically.3. Press the numeric button (0~9) or channel up / down (< / >) button on the remote control or >C/P.P< button on yourset.When you switch the set on for the very first time, you will be asked to choose language in which the menus are to bedisplayed.4. To switch your set off, press the POWERP button again.Placing Your Television in Standby ModeYour set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when youwish to interrupt viewing temporarily (during a meal, for example).1. Press the POWERP button on the remote control.The screen is turned off and a red standby indicator appears on your set.. To switch your set back on, simply press the POWERP, numeric buttons (0~9), TV button or channel up / down (< / >)button again.Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best tounplug the set from the mains and aerial.NNNNNNNNN
