English - 25Basic Functions1. Display ScreenBefore you can view the television program, you must perform the installation.Therefore you will see only menu images at first. After the television channelshave been programmed, you will see the following picture (banner) each timeyou switch channels:Detailed program informationFirst you will see the banner described above.After pressing the INFO buttonfor the second time you will receive detailed program information for currentprogram can be displayed on another banner, if there is more information.When this information is more than one page, P / can be used for pageup and down.➢ This service depends on service provider.2. Volume ControlTo control the volume level:• Press the + - buttons to adjust the volume level.• Press the MUTE button to turn to silence mode.• Press the MUTE button again or + - buttons in order to cancel themute function.3. Select Soundtrack• Press the ALT button to see the soundtrack list.• Press the … or † and ENTER/OK ( ) buttons to select one.4. Select Videotrack• Press the ALT button twice to see the videotrack list.• Press the … or † and ENTER/OK ( ) buttons to select one.5. Service List• Press the CH MGR button while you are viewing a program.• Select list by pressing the TV/RADIO button.The icon behind the channel name symbolizes scrambled channel,and the icon behind the channel name symbolizes parental lockedchannel.• Select the channel by pressing the … or † and press the P / formoving up or down pages on the lists.• Press the ENTER/OK ( ) button to watch that channel.continued...Channel NumberSignal Status Program InformationThe number of soundtrackin current channel