English - 112Cable Network SetupAuto SetupIf you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically configured.Please check if the LAN cable is connected. (See page 110)1 Press the MENU button to display the menu.Press the ▲ or ▼ button to select Setup, then press the ENTER button.2 Press the ▲ or ▼ button to select Cable Network Setup, then press theENTER button. Press the ENTER button to select Internet Protocol Setup.4 Press the ▲ or ▼ button to select Auto Setup, then press the ENTERbutton.The Internet Protocol is set automatically.Select Network Test to check the network connectivity.(Refer to page 113)Press the EXIT button to exit.Manual SetupTo connect the TV to the LAN using a static IP address, you must set up theInternet Protocol (IP).Please check if the LAN cable is connected. (See page 110)1 Press the MENU button to display the menu.Press the ▲ or ▼ button to select Setup, then press the ENTER button.2 Press the ▲ or ▼ button to select Cable Network Setup, then press theENTER button. Press the ENTER button to select Internet Protocol Setup.4 Press the ▲ or ▼ button to select Manual Setup, then press the ENTERbutton.5 Press the ▲, ▼, ◄ or ► button to move to an item, and press the numericbutton to configure the selected item. Press the ENTER button.Select Network Test to check the network connectivity.(Refer to page 113)Press the EXIT button to exit.➣➣➣➣➣SetupLanguage : EnglishTimeCableNetworkSetup ►V-ChipCaptionExternal SettingsEntertainment : OffEnergy Saving : OffPIPSoftware UpgradeSetupLanguage : EnglishTimeCableNetworkSetup ►V-ChipCaptionExternal SettingsEntertainment : OffEnergy Saving : OffPIPSoftware UpgradeCable Network SetupInternet Protocol Setup : Auto SetupNetwork TestIP Address : 0 0 0 0Subnet Mask : 0 0 0 0Gateway : 0 0 0 0DNS Server : 0 0 0 0EnterMove ReturnAuto SetupManual SetupCable Network SetupInternet Protocol Setup : Auto SetupNetwork TestIP Address : 0 0 0 0Subnet Mask : 0 0 0 0Gateway : 0 0 0 0DNS Server : 0 0 0 0EnterMove ReturnAuto SetupManual SetupCable Network SetupInternet Protocol Setup : Manual SetupNetwork TestIP Address : 0 0 0 0Subnet Mask : 0 0 0 0Gateway : 0 0 0 0DNS Server : 0 0 0 0Enter ReturnMove Number0 ~