English - 118Anynet+ MenuThe Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.Anynet+ Menu DescriptionView TV Anynet+ mode changes to TV broadcast mode.Device List Shows the Anynet+ device list.(Device_Name) Menu Shows the connected device menus.E.g. If a DVD recorder is connected, the disc menu of the DVD recorder will appear.(Device_Name) Operation Shows the play menu of the connected device.E.g. If a DVD recorder is connected, the play menu of the DVD recorder will appear.Record: (*recorder) Starts recording immediately using the recorder. (This is only available for devices thatsupport the recording function.)(*recorder) Reserve Recording Enables reserving a recording for the recorder. (This is only available for devices that support therecording reservation function.)Stop Recording: (*recorder) Stops recording.Receiver Sound is output through the receiver.➢ If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device isconnected, it will be represented as (*device_name).TV Remote Control Buttons Available in Anynet+ ModeDevice Type Operating Status Available ButtonsAnynet+ DeviceAfter switching to the device, when the menuof the corresponding device is displayed on thescreen.Numeric buttons▲/▼/◄/►/ENTERRETURNTOOLSINFOW.LINKCH LISTEXITbuttonsColor buttons / EXIT buttonAfter switching to the device, while playing a file RETURNTOOLSINFOW.LINKCH LISTEXIT(Backward search) / RETURNTOOLSINFOW.LINKCH LISTEXIT(Forward search)RETURNTOOLSINFOW.LINKCH LISTEXIT(Stop) /RETURNTOOLSINFOW.LINKCH LISTEXIT(Play) / RETURNTOOLSINFOW.LINKCH LISTEXIT(Pause)Device with built-in Tuner After switching to the device, when you arewatching a TV program CH / CH buttonAudio Device When a Receiver is activated VOL – / VOL + / MUTE button➢ The Anynet+ function only works when the active source on the TV remote control is set to TV.➢ TheRETURNTOOLSINFOW.LINKCH LISTEXITbutton works only while in the recordable state.➢ You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TVremote control.➢ The TV remote control may not work under certain conditions. In this case, reselect the Anynet+ device.➢ The Anynet+ functions do not operate with other manufacturers’ products.➢ The RETURNTOOLSINFOW.LINKCH LISTEXIT, RETURNTOOLSINFOW.LINKCH LISTEXIToperations may differ depending on the device.RecordingYou can make a recording of a TV program using a Samsung recorder.1 Press the TOOLS button.Press the ENTER button to select Anynet+ (HDMI-CEC).2 Press the ▲ or ▼ button to select Recording: (device_name), then press theENTER button. Recording begins.When there is more than one recording deviceWhen multiple recording devices are connected, the recording devices are listed.Press the ▲ or ▼ button to select a recording device and press the ENTER button.Recording begins.When the recording device is not displayedSelect Device List and press the red button to search devices.Press the EXIT button to exit.➢ You can record the source streams by selecting Recording: (device_name).➢ Pressing theRETURNTOOLSINFOW.LINKCH LISTEXITbutton will record whatever you are currently watching. If you are watching video from anotherdevice, the video from the device is recorded.➢ Before recording, check whether the antenna jack is properly connected to the recording device. To properly connectan antenna to a recording device, refer to the recording device’s users manual.ReturnEnterMoveView TVDevice ListRecording : DVDRDVDR OperationReceiver : OnSetup