Samsung Plasma TV User Manual
Also see for PL42C430: User manualUser manual
                                                                         | |
Contents
|
16 EnglishBasic Featuresx After selecting Screen Fit in HDMI (1080i/1080p) orComponent (1080i/1080p) mode, you may need tocenter the picture:1. Press the ◄ or ► button to select Position.2. Press the ENTERE button.3. Press the ▲, ▼, ◄ or ► button to move thepicture.4. Press the ENTERE button.5. Press the ◄ or ► button to select Reset.6. Press the ENTERE button.x HD (High Definition): 16:9 - 1080i/1080p (1920x1080),720p (1280x720)x Settings can be adjusted and stored for eachexternal device you have connected to an input onthe TV.Input Source Picture SizeATV, AV,Component (480i, 480p)16:9, Zoom1,Zoom2, 4:3DTV(1080i),Component (1080i, 1080p),HDMI (720p, 1080i, 1080p)16:9, 4:3, Wide Fit,Screen Fit■ Digital Noise Filter (Off / Low / Medium / High /Auto): If the broadcast signal received by your TV isweak, you can activate the Digital Noise Filter featureto reduce any static and ghosting that may appear onthe screen.✎ When the signal is weak, try other options until thebest picture is displayed.■ HDMI Black Level (Normal / Low): Selects the blacklevel on the screen to adjust the screen depth.✎ Available only in HDMI mode.■ Film Mode (Off / Auto): Sets the TV to automaticallysense and process film signals from all sources andadjusts the picture for optimum quality.✎ Available in TV, AV, COMPONENT (480i / 1080i)and HDMI (480i / 1080i).■ Screen Burn Protection: To reduce the possibility ofscreen burn, this unit is equipped with screen burnprevention technology. The Time setting allows you toprogram the time between movement of the picture inminutes.Pixel Shift (Off / On): Using this function, you canminutely move pixels on the PDP in horizontal or verticaldirection to minimize after images on the screen.✎ Optimum condition for pixel shiftItem TV/AV/Component/HDMI/PCHorizontal 0~4 4Vertical 0~4 4Time (minute) 1~4 min 4 min✎ The Pixel Shift value may differ depending on theTV size (inches) and mode.✎ This function is not available in the Screen Fitmode.Scrolling: This function removes after-images on thescreen by moving all the pixels on the PDP accordingto a pattern. Use this function when there are remainingafter-images or symbols on the screen, especially whenyou displayed a still image on the screen for a long time.✎ The after-image removal function has to beexecuted for a long time (approximately 1 hour)to effectively remove after-images on the screen.If the after-image is not removed after performingthe function, repeat the function again.✎ Press any key on the remote control to cancel thisfeature.Side Gray (Dark / Light): When you watch TV with thescreen ratio set to 4:3, the screen is prevented from anydamage by adjusting the white balance on both extremeleft and right sides.Picture Reset (Reset Picture Mode /Cancel)Resets your current picture mode to its default settings.Sound Menu¦ Changing the Preset Sound ModeO MENUm → Sound → Mode → ENTEREMode t■ Standard: Selects the normal soundmode.■ Music: Emphasizes music over voices.■ Movie: Provides the best sound formovies.■ Clear Voice: Emphasizes voices overother sounds.■ Custom: Increase the intensity ofhigh-frequency sound to allow a betterlistening experience for the hearingimpaired.S.MODE |
Related manuals for Samsung PL42C430
manualsdatabase
Your AI-powered manual search engine