Samsung QE82N Quick Setup Manual

Quick Setup GuideQE82N* Recommended hours of use per day of this product is under 16 hours. If the product isused for longer than 16 hours a day, the warranty may be void.* The colour and the appearance may differ depending on the product, and the content inthe manual is subject to change without prior notice to improve the performance.* Download the user manual from the website for further details.http://www.samsung.com/displaysolutionsBN68-09326E-01Checking the ComponentsPortsIssues SolutionsThe screen keepsswitching on and off.Check that the cable between the productand the PC is connected correctly.No Signal isdisplayed on thescreen.Check that the product is connectedcorrectly with a cable.Check that the source device connected tothe product is powered on.Depending on the type of external device,the screen may not display properly. In thiscase, connect it with the HDMI Hot Plugfunction turned On.Not Optimum Modeis displayed.This message is displayed when a signalfrom the graphics card exceeds the product’smaximum resolution and frequency.Refer to the Standard Signal Mode Tableand set the maximum resolution andfrequency according to the productspecifications.The images onthe screen lookdistorted.Check the cable connection to the product.The screen appearsunstable and shaky. Check that the resolution and frequency ofthe PC and graphics card are set within arange compatible with the product. Then,change the screen settings if required byreferring to ‘Preset Timing Modes’.There are shadows orghost images left onthe screen.Troubleshooting GuideContact the vendor where you purchased the product if anycomponents are missing.The pictures may look different from the actual components.Quick Setup GuideWarranty card(Not available insome locations)Power cordBatteries (AAA x 2)(Not available insome locations)Remote Control RS232C(IN) adapterHOLDER-CABLE Holder-Ring x 4 StandPartsThe terms HDMI and HDMI High-Definition Multimedia Interface,and the HDMI Logo are trademarks or registered trademarks ofHDMI Licensing LLC in the United States and other countries.1 Connect to a USB memory device.* The USB ports on the product accept a maximum constantcurrent of 1.0A. If the maximum value is exceeded, USB portsmay not work.2 Connects to MDC using a LAN cable. (10/100 Mbps)3 Connects to MDC using an RS232C adapter.4 DVI: Connects to a source device using a DVI cable or HDMI-DVIcable.MAGICINFO IN: To use MagicInfo, make sure to connect theDP-DVI cable.5 Connects to a source device using a HDMI cable or HDMI-DVI cable.6 Receives sound from a source device via an audio cable.7 Outputs sound to an audio device via an audio cable.8 Connects to MDC using an RS232C adapter.9 Connect to a USB memory device.* The USB ports on the product accept a maximum constantcurrent of 0.5A. If the maximum value is exceeded, USB portsmay not work.81 Remote sensorPress a button on the remote control pointing at the bottom of the product face to perform the function.The remote control sensor is located on the bottom of the product.* Using other display devices in the same space as the remote control of this product can cause the other display devices to beinadvertently controlled.2 Power buttonTurns the product on or off.Speaker

/ 2

Related manuals for Samsung QE82N