Samsung QM43N Quick Setup Manual

Also see for QM43N: User manual

Quick Setup GuideQM43N QM49N QM55N QM65N QM75N* The colour and the appearance may differ depending on the product, and the content inthe manual is subject to change without prior notice to improve the performance.* Download the user manual from the website for further details.http://www.samsung.com/displaysolutionsBN68-09134E-001 Connect to a USB memory device.* The USB ports on the product accept a maximum constantcurrent of 1.0A. If the maximum value is exceeded, USB portsmay not work.2 Connects to MDC using a LAN cable. (10/100 Mbps)3 Connects to MDC using an RS232C adapter.4 DVI: Connects to a source device using a DVI cable or HDMI-DVIcable.MAGICINFO IN: To use MagicInfo, make sure to connect theDP-DVI cable.5 Connects to a source device using a HDMI cable or HDMI-DVIcable.6 Connects to a source device using a HDMI cable or HDMI-DVIcable.Connects to another product using a HDMI cable.7 Connects to a PC using a DP cable.8 Connects to another product using a HDMI cable.9 Connect to a USB memory device.* The USB ports on the product accept a maximum constantcurrent of 0.5A. If the maximum value is exceeded, USB portsmay not work.0 Receives sound from a source device via an audio cable.! Outputs sound to an audio device via an audio cable.@ Connects to an external IR cable that receives signals from theremote control.# Connects to MDC using an RS232C adapter.Issues SolutionsThe screen keepsswitching on and off.Check that the cable between the productand the PC is connected correctly.No Signal isdisplayed on thescreen.Check that the product is connectedcorrectly with a cable.Check that the device connected to theproduct is powered on.Depending on the type of external device,the screen may not display properly. In thiscase, connect it with the HDMI Hot Plugfunction turned On.Not Optimum Modeis displayed.This message is displayed when asignal from the graphics card exceedsthe product’s maximum resolution andfrequency.Refer to the Standard Signal Mode Tableand set the maximum resolution andfrequency according to the productspecifications.The images onthe screen lookdistorted.Check the cable connection to the product.The screen appearsunstable and shaky. Check that the resolution and frequency ofthe PC and graphics card are set within arange compatible with the product. Then,change the screen settings if required byreferring to ‘Preset Timing Modes’.There are shadows orghost images left onthe screen.Issues SolutionsThere is no imageon the screen andthe power indicatorblinks every 0.5 to 1second.The product is in power-saving mode.Press any key on the keyboard or move themouse to return to the previous screen.The remote controldoes not work.Make sure that the batteries are correctlyin place (+/-).Check if the batteries are flat.Check for power failure.Make sure that the power cord isconnected.Check for any special lighting or neon signsswitched on in the vicinity.A beeping sound isheard when my PC isbooting.If a beeping sound is heard when your PC isbooting, have your PC serviced.When I try to changethe PC resolution, amessage The definedresolution is notsupported. appears.The message The defined resolutionis not supported. appears if the inputsource resolution exceeds the maximumresolution of the display.To resolve the issue, change the PCresolution to a resolution supported on thedisplay.Checking the Components PartsPortsTroubleshooting GuideContact the vendor where you purchased the product if anycomponents are missing.The pictures may look different from the actual components.1 Remote sensorPress a button on the remote control pointing at the sensor onthe front of the product to perform the corresponding function.* Using other display devices in the same space as the remotecontrol of this product can cause the other display devices tobe inadvertently controlled.2 Power indicator3 Power buttonTurns the product on or off.Quick Setup GuideWarranty card(Not available insome locations)MagicInfo SoftwareDVDPower cordBatteries (AAA X 2)(Not available insome locations)Remote ControlRS232C(IN) adapterHOLDER-CABLE(Supported models:QM65N, QM75N)Holder-Ring X 4123870 !#@4569132SpeakerThe terms HDMI and HDMI High-Definition Multimedia Interface,and the HDMI Logo are trademarks or registered trademarks ofHDMI Licensing LLC in the United States and other countries.

/ 2

Related manuals for Samsung QM43N