Samsung QM Series Quick Setup Manual

Also see for QM43R: User manual User manual User manual User manual Manual

BN68-09660D-00The terms HDMI and HDMI High-Definition Multimedia Interface,and the HDMI Logo are trademarks or registered trademarks ofHDMI Licensing LLC in the United States and other countries.Quick Setup GuideQM43R QM49R QM55R QM65R QM75R* The colour and the appearance may differ depending on the product, and the content inthe manual is subject to change without prior notice to improve the performance.* Download the user manual from the website for further details.http://www.samsung.com/displaysolutionsContact the vendor where you purchased the product if anycomponents are missing.The appearance of the components may differ from the images shown.Quick Setup GuideWarranty card(Not available insome locations)Power cordBatteries (AAA x 2)(Not available insome locations)Remote Control RS232C(IN) adapterHOLDER-CABLE(Supported models:QM65R, QM75R)Holder-Ring x 4Checking the Components Parts1 Remote sensorPress a button on the remote control pointing at the sensor onthe front of the product to perform the corresponding function.* Using other display devices in the same space as the remotecontrol of this product can cause the other display devices to beinadvertently controlled.2 Power indicator3 Power buttonTurns the product on or off.321SpeakerPorts0 !#@9123874561 Connect to a USB memory device.* The USB ports on the product accept a maximum constantcurrent of 1.0A. If the maximum value is exceeded, USB portsmay not work.2 Connects to MDC using a LAN cable. (10/100 Mbps)3 Connects to MDC using an RS232C adapter.4 DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable.MAGICINFO IN: Connects to a network box using DP-DVI cable touse Magicinfo.5 Connects to a source device using a HDMI cable or HDMI-DVIcable.6 Connects to a source device using a HDMI cable or HDMI-DVIcable.Connects to another product using a HDMI cable.7 Connects to a PC using a DP cable.8 Connects to another product using a HDMI cable.9 Connect to a USB memory device.* The USB ports on the product accept a maximum constantcurrent of 0.5A. If the maximum value is exceeded, USB portsmay not work.0 Receives sound from a source device via an audio cable.! Outputs sound to an audio device via an audio cable.@ Connects to an external IR cable that receives signals from theremote control.# Connects to MDC using an RS232C adapter.Troubleshooting GuideIssues SolutionsThe screen keepsswitching on and off.Check that the cable between the productand the PC is connected correctly.No Signal isdisplayed on thescreen.Check that the product is connectedcorrectly with a cable.Check that the source device connected tothe product is powered on.Depending on the type of external device,the screen may not display properly. In thiscase, connect it with the HDMI Hot Plugfunction turned On.Not Optimum Modeis displayed.This message is displayed when asignal from the graphics card exceedsthe product’s maximum resolution andfrequency.Refer to the Standard Signal Mode Tableand set the maximum resolution andfrequency according to the productspecifications.Issues SolutionsThere is no imageon the screen andthe power indicatorblinks every 0.5 to 1second.The display is turned off to save energy.Press any key on the keyboard or move themouse to return to the previous screen.The remote controldoes not work.Make sure that the batteries are correctly inplace (+/-).Check if the batteries are flat.Check for power failure.Make sure that the power cord isconnected.Check for any special lighting or neon signsswitched on in the vicinity.

/ 2

Related manuals for Samsung QM43R