54 Printer Options8. Reassemble the shield cover.9. Turn the printer back over and replace the Toner Cartridge. Pullout the feeder and stacker extenders. Then, reconnect the printercable and power cord and power ON the printer.Note: When you disassemble the memory card, push out on the metalclips at each end of the connector, and pull it toward you.7. Push it away from you, until it snaps into place.Make sure both metal clips on the connector are fastened and thetwo pins on the connector are visible through the holes on eachend of the memory card. The pins should be flush with the surfaceof the card.PinMetal clipMetal clip05-Options 5/10/99 2:01 PM Page 4
