Samsung RF263BEAESR User Manual

Also see for RF263BE Series: User manual User manual User manual

08_ setting upDisconnect two connector (2. 2 ) on the left sidedoor. To remove the water coupler from thehinge, twist and pull it from the hinge. Removethe water line ( 3 ) while pressing the markedpart ( 4 ) of the water line coupler.If a red clip is on the coupler, it must beremoved before removing the tube.Pull and remove the hinge lever (3. 5 ) . Removethe ground screw ( 6 ) attached to the upperleft door hinges with a philips screwdriver (+).Remove the upper left and right door hinges( 7 ).Lift the door straight up to remove.4.Remove the screw (5. 8 ) attached to thelower left and right door hinges with a philipsscrewdriver (+). Remove the 2 hex head bolts( 9 ) attached to the lower left and right doorhinges with an allen wrench (3/16”). Removethe lower left and right door hinges ( 10 ).REATTAChING ThEREFRIGERATOR DOORSTo reattach the fridge doors after you have movedthe fridge to its final location, assemble parts inreverse order.The Water Line must be fully Inserted to the1.center of transparent coupler to prevent waterleakage from the dispenser.Insert2. the clip in the install pack and check that itholds the line firmly.DISASSEMBLE ThE FLEx DOORTake out the upper drawer by lifting it up.1.Take out the lower basket (2. 1 ) by lifting thebasket up from the rail system.Press the fixing hook of rail system.3.CAUTION234Red Clip(1/4")5 67Allen wrench10891Center of transparentcouplerclip A (1/4”)(6.35mm)DA68-02601A(EN+FR+ES)-0.2.indb 8 2012.3.31 9:49:38 AM