English58MaintenanceHandling and careIce bucketIf you do not dispense ice for an extended period, ice may form clumps inside the bucket.If this happens, remove and empty the ice bucket.1. To remove the ice bucket, gently liftit up, and then pull it out slowly whileholding the bottom of the bucket withone hand and the side with the otherhand.2. Empty the bucket.3. When done, put the bucket back intoposition. If the bucket does not fit in,turn the helix screw 90 degrees, andthen try again.CAUTION• Do not apply excessive force to the bucket cover. The cover may break.• Do not forcefully close the door. Water may spill over the ice maker.• To prevent injury, make sure to clean up any ice or water that has fallen on the floor.• To prevent accidents or injury, do not let children play with the water dispenser or theice maker.• Do not put your hand or an object into the ice chute. This may cause physical injury orproduct damage.• Use only the provided ice bucket. Third-party ice buckets may cause a system failure.• Use only potable water that is connected to the water supply line.NOTE• The water pressure required for ice making is between 20 psi and 125 psi.• Noise from the the ice maker as it produces ice during the ice making process isnormal.• While the door is open, neither the ice maker nor the water dispenser operates.MaintenanceUntitled-1 58 2017-02-08 12:16:31