English - 1101 SETTING UP• Be careful not to injure yourself while removingthe doors/drawer.• Reattach the doors/drawer properly to avoid:- Moisture from air leakage.- Uneven door alignment.- Wasting energy due to improper door seal.WARNINGDisassembling the refrigerator doorsBe careful not to drop and scratch the doors whileremoving them.With the door opened1. Remove the 3 screws holding down the TOPTABLE ( 1 ) and separate the connected wires.12. Disconnect the two connectors ( 2 ) on theleft side door. To remove the water couplerfrom the hinge, twist and pull it from the hinge.Remove the water line ( 3 ) while pressing themarked part ( 4 ) of the water line coupler.CAUTIONIf a red clip is on the coupler, you must remove itbefore removing the tube.234Red ClipRed Clip(1/4")(1/4")3. Pull and remove the hinge lever ( 5 ). Removethe ground screw ( 6 ) attached to the upperleft door hinges with a philips screwdriver (+).Remove the upper left and right door hinges( 7 ).5 674. Lift the door straight up to remove.5. Remove the screw ( 8 ) attached to thelower left and right door hinges with a philipsscrewdriver (+). Remove the 2 hex head bolts( 9 ) attached to the lower left and right doorhinges with an allen wrench (3/16”). Removethe lower left and right door hinges ( 10 ).Allen wrenchAllen wrench1089DA68-02952A-01.indb 11DA68-02952A-01.indb 11 2013. 12. 3. 8:502013. 12. 3. 8:50