Samsung RF28HM Series User Manual

Also see for Refrigerator: Owner's manual User manual User manual User manual Owner's instructions

English - 2902 OPERATING• Tilt up the front of the drawer and pull straighttowards you. Then, move the drawer slightlyin the direction of the arrow in the illustrationbelow, and then pull out.To re-install• Insert the drawer into the frame rails and pushback into place.• Slide the bin in above the desired location andpush down until it stops.CAUTIONThe drawers need to be removed before the glassshelf above them can be lifted out.4. Flex ZoneTo remove the Flex Zone – Pull the Flex doorout to full extension. Lift the Flex Zone up, pullingit to your body with both hands.To re-install the Flex Zone – Open the Flex doorto full extension. Tilt the front of the Flex Zone up,place the back of the Flex Zone onto the rails, andthen lower the front until the whole Zone rests onthe rails.If the Flex Zone or LED lighting is notworking, check the connectors [ ( 1 ), ( 2 )shown below ] for cracks or leaks.121. Refer to page 12 for disassembly instructions.2. Open the cap cover rail with a flat-bladescrewdriver.Using the doorsEnsure that the doors close all the way and aresecurely sealed.When the refrigerator door is only partially open, itwill automatically close. If the door is opened morethan its auto close range, it will remain open. Youmust close it manually.DA68-02952A-01.indb 29DA68-02952A-01.indb 29 2013. 12. 3. 8:502013. 12. 3. 8:50