27DISASSEMBLY AND REASSEMBLY• Unplug the refrigerator before cleaning and making repairs.• Do not dissemble or repair the refrigerator by yourself.- It may cause risk of causing a fire, malfunction and/or personal injury.• Remove any foreign matter or dust from the power plug pins.- Otherwise there is a risk of fire.• Do not use a cord that shows cracks or abrasion damage along its length or at either end.• Do not plug several appliances into the same multiple power board. The refrigerator should always beplugged into its own individual electrical which has a voltage rating that matched the rating plate.- This provides the best performance and also prevents overloading house wiring circuits, which couldcause a fire hazard from overheated wires.• Do not install the refrigerator in a damp place or place where it may come in contact with water.- Deteriorated insulation of electrical parts may cause an electric shock or fire.• The refrigerator must be grounded.- You must ground the refrigerator to prevent any power leakages or electric shocks caused by currentleakage from the refrigerator.• Do not put bottles or glass containers in the freezer.- When the contents freeze, the glass may break and cause personal injury.• Do not store volatile or flammable substances in the refrigerator.- The storage of benzene, thinner, alcohol, ether, LP gas and other such products may causeexplosions.- Required Tools3-1) PRECAUTIONIMAGE ITEM USE1IJMMJQT)FBE%SJWFS 6TFGPSBTTFNCMJOHBOEEJTBTTFNCMJOHPGTDSFX'MBU)FBE%SJWFS6TFGPSBTTFNCMJOHBOEEJTBTTFNCMJOHPG)PNF#BS %JTQFOTFS %FMJ$BSUFTTFO#PY .BJO1#"FUD)FY8SFODIʡNN 6TFGPSBTTFNCMJOHBOEEJTBTTFNCMJOHPG)BOEMF4PDLFU8SFODIʡNN 6TFGPSBTTFNCMJOHBOEEJTBTTFNCMJOHPG%PPS)JOHF