Samsung RFG297AARS Service Manual

Also see for RFG297AABP: Specifications

Contents

584-1-4. Display function of Load condition1) If Power Energy Saver Key + Lighting key are pressed simultaneously for 6 seconds during normaloperation, the temperature setting display of fresh food and freezer compartments will blink ALL ON/OFFwith 0.5 for 2 seconds.2) At this moment, If Fridge Key after Energy Saver Key + Lighting Key is pressed, load condition displaymode will be returned with alarm.3) Load condition display mode shows the load that micom signal is outputting.However, It means that micom signal is outputting, it does not mean whether load is operating or not.That is to say that though load operation is displayed, load could not be operated by actual load error orPCB relay error etc. (This function would be applied at A/S.)4) Load condition display function will maintain for 30 seconds and then normal condition will be returnedautomatically.5) Load condition display is as below.TROUBLESHOOTING˝˝ ˝˝˞˞˝ If Energy Saver Key + Lighting key are pressed simultaneously for 6 seconds, ALL ON/OFF will blinkwith 0.5interval for 2 seconds.˞ If take the finger off from above keys and press Fridge, load condition mode will be started.F-1F-10 R-1R-10